Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Tania Bielizna i piżamy damskie męskie
Sklep online tanie
177.50 $
50 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Commercial stove infrared anti-air burning controller function description
The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process:
The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, such as infrared light is blocked. It means that there is a pot to keep the burning state, otherwise the gas valve is closed and the flame is extinguished to prevent air burning. After that, the pots were monitored at any time, and there were pots and no pots. Function Description 1. High-energy ignition, sparks like open flames.
2. Prevent empty burning waste, automatically turn off the oil off the pot, put the pot to automatically send oil to ignite.
3, 24V gas solenoid valve with emergency switch, can be opened for continued use in case of accident. Installation Notes
1. Determine the installation position of the control box according to the length of the lead wire. It is recommended to install it on the iron frame behind the front plate of the furnace to avoid the high temperature area as much as possible.
2. Install the gas solenoid valve horizontally and keep the solenoid valve away from the high temperature zone.
3. Ignition pin installation method: double-needle ignition two-pin furnace fires each other, installed near the air outlet.
4. Installation of infrared emission and reception. Controller related connection:
1. Connect the power cable to 220V AC power supply. Set the power switch to start or stop the work. Turn off the power when not in use.
2. The ignition wire is connected to the ignition pin for ignition. The ignition pin is recommended to be in the form of a double point, which is most beneficial for the stable operation of the controller. If the single-fired burner is used, it will increase the probability of the controller being disturbed, so we do not encourage it. Be sure to reliably ground one of the high voltage wires when the customer must use it.
3. A 24V gas solenoid valve is connected to the solenoid valve line to control the total oil circuit of the stove.
4. Two-core waterproof plug is connected to the infrared emitter.
5. Four-core waterproof plug is connected to the infrared receiver.
6. In view of the harsh working environment of commercial stoves, in order to ensure long-term reliable operation of the controller, it is strongly recommended to take the waterproof and anti-fouling work of each wire joint seriously. After the debugging, the exposed wires and joints are wound with a wrap and a plastic wrap. Insulating tape and the like are tightly wound.
Installation instructions for the transmitter and receiver:
1. First, on the left side of the front beam of the furnace surface, first open the Φ20mm hole from the edge of 6-10cm. After the middle hole of the base is aligned with the opened hole, open the hole of the fixed base and fix the base of the emitter with the rivet. Insert the emitter into the hole, adjust the direction and fix the emitter with screws.
2. Drill the base of the emitter with a rivet according to the shape of the emitter;
3. Fix the receiving head on the back plate. Different hobs have different fixed positions, generally installed as follows;
a. Avoid the high temperature area of the exhaust vent and the high temperature area on the back of the stove;
b. The optical path of the transmitting head and the receiving head passes through the center point of the furnace
c. The optical path connection between the transmitting head and the receiving head cannot be blocked by the height of the furnace, and the nearest distance is 1-2 cm higher than the furnace;
d. Place the pot on the pan holder and do not block the light path connection between the emitter and the receiving head; at this time, the light path connection should be 2~4CM in front of the pot.
4. Open the Φ20mm hole at the selected position on the back plate. After the middle hole of the base is aligned with the hole opened, open the hole of the fixed base, fix the base of the receiving head with the pull stud, insert the receiving head into the hole, and adjust it. Then fix the receiving head with screws.
5. If two sets of controllers are installed on the double-head hob, the left and right sides are symmetrically installed. The two receiving heads are in the middle and the two transmitting heads are on both sides. Commissioning instructions for the controller:
1. Commission the power after installing all components. Infrared radiation debugging:
A. The upper part of the aluminum infrared component has a small eye. The function is to emit a beam of infrared light that is invisible to the naked eye to the receiving head to detect whether there is a pot on the stove. When there is a pot, the light will be blocked and the receiving head will not be received, otherwise an infrared signal will be received. This infrared ray is modulated and will not be confused with other infrared rays in the environment. The receiving head will clearly filter out this effective signal to achieve a correct judgment on the existence of the pot.
B. The aluminum infrared component has a glass window at the side end, which is a receiving head, built-in infrared receiving component and status indicator. The light is always on, indicating that the correct infrared signal is received, indicating that the infrared light is not blocked, and the transmitting and receiving directions are basically Normal, within the valid range. On the contrary, the flashing of the light indicates that the infrared signal is not received, indicating that the infrared light is blocked or emitted by the cookware, and the receiving direction is not within the effective range.
C, adjust the transmitting head to make the transmitting head emit in the direction of the receiving head. At this time, the infrared emitting head is blocked, the receiving head red light flashes, indicating that the receiving head controller is ignited, the electromagnetic valve is opened, and the receiving head is red when removed. Always bright. Precautions:
1. In the state of power or ventilation, the operator or other personnel are strictly prohibited to use the head or other body parts close to the burner, or block the light path to avoid fire burns. When it is necessary to check for fire, the fan must be turned on;
2. Under the working condition, it is strictly forbidden to place other items in the light path, so as to prevent the light path from being out of control.
3. To better experience the performance of this product, periodically wipe the transmitter and receiver with a soft object such as a sponge.
4. Cover the receiver's transmitter with something when cleaning the stove to prevent hard objects from getting scratched or water.
5. For everyone's safety, always close the main valve when not using the stove! ! !
6, commercial stove igniter – lead wire connection description: two high-voltage ignition wire 800mm with double-needle ignition needle for relative ignition, or a high-voltage ignition wire 800mm with ignition needle, and another high-voltage ignition wire 800mm The furnace body, the distance between the ignition needle and the metal of the burner is 5-6mm, and the ignition is discharged for the burner to form an ignition circuit. Ignition high-voltage line connection: The company strongly recommends that the customer use the dual-purpose ignition for the ignition needle. This kind of ignition effect is better. If the double-needle can only be used with a single needle because of the burner, one of the high-voltage output leads 800mm Connect the ceramic ignition needle, another high-voltage output lead 800mm must be fixed on the burner with screws. The distance between the ignition needle and the metal of the burner is 5-6mm. The ignition is discharged against the burner to form an ignition circuit. Note that it is not on the stove, it is not attached to the hob. If it is connected to the hob, the ignition circuit is very long. Moreover, the hob and the burner are not necessarily connected, so the ignition is cut off. In the loop, the igniter only uses half the power. Maybe you can hardly understand the truth at the same time. Maybe you will say that I have been connected in this way. It is very good. You just have to try it. So the igniter output high voltage line produced by our company is double long line. Length 800mm,
Infrared anti-air burning controller installation precautions
1. The installer must have an electrician installation qualification.
2. The rated input voltage of this igniter is 220V 50HZ. A qualified leakage circuit breaker must be installed at the front end of the power supply. The metal casing of the cooker must be protected by a grounding wire. It is strictly forbidden to connect the metal casing with a neutral wire!
3. The control switch on the panel should use a bipolar power switch of not less than 5A/250V, and the igniter power cord is connected to the power switch.
4. The controller can be fixed or suspended in the lower space of the cooker, and should avoid high temperature radiation baking.
5. High-voltage line is connected to the ignition needle. It is recommended to use dual-ignition ignition mode. The discharge spacing of the ignition needle is 3-5mm. Try not to use the single-discharge method. If only one high-voltage line is connected to the ignition needle, the other high-voltage line must be reliably connected to the burner. On the metal body, it can not be easily connected to the metal casing of the cooker, which will bring many difficult problems!
6. The length of the high-voltage line is “sufficiently long and shortest”. It is better to separate the two lines by more than 3 cm, and maintain a certain degree of drooping arc to facilitate oil drop. The high-voltage line can not be extended continuously. The wiring is not allowed to be close to the iron frame and iron plate of the stove. Do not add all kinds of casings. It is absolutely necessary to avoid twisting the two high-voltage wires together to avoid high-frequency high-voltage leakage.
7. Regularly clean up debris and do not rinse with water.
Main function description of commercial steam boiler ignition controller: First, the product features: 1, working voltage: 175V-245VAC 2, with water level detection, water shortage protection. 3, with wind pressure switch safety protection control fan, if no wind pressure switch, the wind pressure switch line is short-circuited. 4, with pseudo-fire, residual fire safety protection 5, with accidental flameout safety protection. 6, with a fault alarm prompt function. 7, control a 3V [...]
71.25 $ Add to cart1. Description of N series atomization controller This series of controllers are used in conjunction with methanol spray burners to complete ignition and firepower adjustment. The ones with extinguishing function can be used in steaming ladle furnaces and other places. System parameter setting method: Long press the setting key to enter the system parameter setting, turn the knob to select the desired menu, then press the setting key to display the value, turn the knob to adjust the value, and then long press the setting key until SAU is displayed, which means the save is successful. Note: If you don't [...]
80.53 $ Add to cartLabel change notice: GM103 is changed to SHRN322 First, the wiring instructions: N: ignition output S: Signal detection Green: Power 220 volts Blue: power sharing line Orange/Blue: PV gas solenoid valve Red/blue: L2 combustion work indicator White/blue: L1 flameout ignition indicator Yellow/blue: siren Black: ground wire Second, the function: Size: 127mm x 70mm x 42mm Mounting hole distance: 118mm aperture φ 5mm Weight: 400g Input voltage: AC220 AC185~AC250V Ignition: output high voltage above 16KV Re-ignition: automatic ignition after flameout Indicator light: flameout ignition indication, combustion work indication, automatic exchange Automatic alarm: Exceeding the ignition time 22 seconds, it will automatically [...]
83.75 $ Add to cartInfrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective [...]
83.75 $ Add to cartDomestic LME11. 330C2 Domestic LME11. 330C2BT Original LME11. 330C2 Original LME11. 330C2BT LME11. 330C2 combustion controller is used for intermittent operation of single stage small capacity up to 350KW gas burners. LME... is used for monitoring and control of single-stage or double-stage gas burners during start-up and intermittent operation. Flame monitoring is through ionizing rod or flame detector QRA and auxiliary equipment AGQ3 or using blue flame detector QRC. According to the size and specifications of the enclosure, LME... is the same combustion controller as LGB and LMG refer to «Model Overview» Convenient remote reset, multiple colors, display error status [...]
126.25 $ Add to cartN series atomization controller description This series of controllers is used in conjunction with a methanol spray burner for ignition and fire regulation. With the extinguishing function, it can be used in places such as steaming furnaces. System parameter setting method: Press and hold the setting button to enter the system parameter setting, turn the knob to select the desired menu, press the setting button to display the value, turn the knob to adjust the value, and then press and hold the setting button until the SAU is displayed, indicating that the saving is successful. Note: If you do not [...]
177.50 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
402.50 $ Add to cart1300-Degree Portable Gas Flame Torch Flamethrower with Adjustable Hose Camping Kitchen Barbecue Flame Ignition Blowtorch Lighter for Cooking Welding can reach 1300 ° C to meet various needs, you can choose different flames according to your requirements.Turn the switch counterclockwise, pull the trigger, the flame is ejected; turn the switch clockwise, the flame will go out.360 ° Rotary curved hose, long design, can be ignitedIt is ideal for thawing and thawing frozen water pipes and other pipes, which is ideal for roasting and carbonized vegetables, glaze, melted cheese, and mixed cheese and sugar housings on pudding, protein [...]
Portable Electric Arc Lighter USB Rechargeable Windproof Electronic Lighter Eco-friendly Aromatherapy for Candles Gas Stoves Feature: 1.Windproof and Flameless Technology: The Arc lighter adopt windproof design and flameless plasma technology to protect the electric pulse from being blown out by strong wind or wet weather. 2.Safty Protection: Its so much easier to light candles with this than traditional butane lighters or matches. A safety lock design keeps children away from fire. The long and flexible soft head allows you to keep a safe distance from sparks. 3.USB Charging: The lighter uses a [...]
360 Rotation BBQ Lighter USB Windproof Flameless Kitchen Plasma Ignition for Gas Stove Candle Barbecue Specification: Product size: Length 260mm Product material: aluminum + zinc alloy Product packaging: Blister packaging Charging port: type-C Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X BBQ Lighter 1 X USB Cable [...]
Portable Electric Arc Lighter USB Rechargeable Windproof Electronic Lighter Eco-friendly Aromatherapy for Candles Gas Stoves Feature: 1.Windproof and Flameless Technology: The Arc lighter adopt windproof design and flameless plasma technology to protect the electric pulse from being blown out by strong wind or wet weather. 2.Safty Protection: Its so much easier to light candles with this than traditional butane lighters or matches. A safety lock design keeps children away from fire. The long and flexible soft head allows you to keep a safe distance from sparks. 3.USB Charging: The lighter uses a lithium [...]
HW-103 igniter: also known as industrial furnace pulse ignition controller, this product is mainly used for ignition and control of various industrial equipment and hotel stoves using liquefied gas, natural gas, artificial gas. Power-on ignition or switch-controlled ignition accidental flameout key ignition function, ion flame automatic monitoring function and flameout alarm, ignition failure and accidental flameout automatically cut off gas source safety protection, using microcomputer digital control technology, using lightning protection technology Power-on ignition/switch Control the ignition, stop the ignition after the flame is automatically detected, the solenoid valve keeps the combustion indicator light on, and when the ignition time [...]
92.50 $ Add to cartNew Wind Fully Automatic Electronic Flame Tool Butane Burners Gas Adapter Torch Lighter Hiking Camping Equipment shop 55 Description: Feature:Flame and temperature can be adjusted, the temperature can be as high as 1350 Deg.C.Wind proof, moisture proof and water resistant, better than electric welding.Fully automatic electronic ignition, safe and easy.Ergonomic design for comfortable holding in the hand.Suitable for restaurant, household, picnic, hiking, camping and other outdoor activities.It can be fixed on butane tank, which can be replaced, cycle use is value: 80g/h. A can of gas can use 1.6 hours to 2 hours continuously, replace the new tank just [...]
Function description of alcohol-based fuel vaporization controller for precise regulation of firepower The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear [...]
415.00 $ Add to cartConvenient Garlic Peeler Curved Hand-held Garlic Press Kitchen Cooking Garlic Press Intensively Garlic Stripper Kitchen Gadget Description: Material: stainless steel PP Main use: can be peeled after the garlic crushed into mashed garlic Color: green, orange, black, stainless steel Style: modern minimalist Specifications: 1. Arc manual garlic press, arc garlic pressing structure, saving time and effort 2. The garlic hole is pressed intensively, and the garlic is pressed out by the fine hole. 3. Put the garlic on the cutting board and apply force to crush it back and forth. 4. Handle design, save [...]
Condition: 100 Brand New Type:Stamp Size:10x10cm Material: Silicone Color: Clear Package Content: 1PC Clear Stamp Ideal for adding distinctive stamped embellishments to handmade cards, scrapbook pages or other paper craft projects Can be arranged and rearranged on stamp blocks in virtually limitless unique combinations Durable stamps provide crisply stamped images every time and won't yellow with age Doing a unique [...]
Plasma Cutter Tip Electrodes Nozzles Kit LG-40 PT-31 Plasma Cutter Cutting Nozzles Air Plasma Tips Cutter Welding Accessories Description: Type: welding material accessories Material: red copper Length: 28m38mn Welding current: 40A Specifications: 1. Including: extended electrode, shunt, extended nozzle, ceramic protective sleeve. 2. It is made of fine craftsmanship, high-quality red copper, high-quality ceramic, durable and durable. 3. Anti-corrosion, anti-oxidation, current stability, copper cable, advanced technology. 4. Applicable to multiple industries: intelligence, automobile, machinery, pipeline, shipbuilding, processing and manufacturing. Package Included: 1 x Nozzle 1 x Electrode 1 x Nozzle electrode 1 [...]
Aquarium Coral Decor Colorful Reef Accessor ies Fake Plants for Landscape Faux Ornament Glows in Light Stabilize Aquarium Decorations for Offices Living Room Bullet Points: 1、Charming Aquarium Decor: It has a vivid image that attracts attention and creates an ocean landscape in your tank. It comes with an artificial sea urchin that adds more charm and color to your aquarium. 2、Perfect Decoration: This fake coral plant is colorful and bright, and it will light up the aquarium with its vibrant hues. It will invigorate the aquarium and make it more lively and attractive. It will also glow in the light [...]
Description: 1.Smart Stop Sync Adapter prevents accidental data exchange when your device is plugged into someone else’s computer or a public charging station. USB Data Blocker achieves this by blocking the data pins on any USB cable and allowing only power to flow through. This minimizes opportunities to steal your data or install malware on your mobile device. 2. USB Data Blocker supports charging upto 12V/3A so the blocker wont slowdown charging and can improve charging speed in some cases. 3.Our USB Data Blocker works with any mobile device: Android, Ios, Windows, Blackberry and [...]
Folding Scissors Pocket Travel Small Cutter Crafts Sharp Blade Emergency Mini Foldable Travel Folding Scissors 301 Medium-Sized Bullet Points: 1、Folding Design: Small folding scissors, foldable scissors allow you to hide sharp blades, avoid potential danger to children, are portable and easy to carry for travel, and fold to put in a bag or pocket. 2、Comfortable Grip: These portable travel scissors are designed with a round handle, leaving enough space for your fingers, it wont make you feel too tight, and the grip is comfortable and easy to hold, giving you a good use experience. 3、High-Quality Material: Our folding safety [...]
Hand Tools Manual Corrugated Pipe Roller Pipe Cutter For Copper Aluminum Stainless Steel Portable Metal Scissor Household Description: Cutting diameter range mm: 5-50mm Cutting diameter range : 5-50mm Applicable to: metal pipe, PPR plastic pipe, copper pipe, aluminum pipe, etc Specifications: 1. Solve the problem of pipe cutting: applicable to cutting copper pipe, aluminum pipe or thin-walled non-hard metal pipe. Do not operate savagely Do not cut round pipes made of hard and thick metal. Only use round pipes made of thin wall and small hardness 2. Bearing steel blade: the blade is forged with bearing steel, with sharp cutting [...]
Baby Pushchair Seat Clip Pram Stroller ABS Hook Baby Teether Toy Supply Carriage Stroller Peg for Towel Blanket Cover Mosquito Net Peg Feature: 1. Environmentally friendly materials are safe and nontoxic. 2. Beautiful and durable, not easy to break. 3. It is very suitable for fixing babys muslin bedspread, blanket, hat, mittens, burp cloth and toys to your stroller. 4. It is portable and suitable for going out and short trips. Specification: Size: 7 x 5cm, maximum opening of clip 4cm Color: Blue/Light Blue Material: ABS Style: crocodile clip Usage scenario: multifunctional cart clip, suitable [...]
ABS Hamburger Meat Press Maker Round Shape Non-Stick Stuffed Beef Grill Pie Burger Patties Press Mould Maker Kitchen Accessories Description: Round Shape Hamburger Press Food-Grade Plastic Hamburger Meat Beef Grill Burger Press Patty Maker Mold Kitchen Tool Material: PVC Shape: Round Colour: white Mold Diameter: 13.2cm Pressing Plate Diameter: 10.6cm Specifications: Features: Hamburger patties mold maker Durable and easy to clean Made from high quality material PVC, safe and no harm to people. Put the meat in the Hamburger Press, and then it will do pretty shape for you. Package Included: 1 x Meat Press Tool Notes: 1. Measurement of [...]
Description: Rear Lens Cover has a compressible design, therefore, Rear Lens Cover can be easily compressed to fit into pockets, backpacks, coin bags, underarms, and Rear Lens Cover can absorb most of the blunt force trauma, so Rear Lens Cover is a super useful product for us to use.Specification: Material: SiliconeApplicable lens brand: Bayonet size: about 5.2cm-5.8cm/ Protective cover for camera lensPacking List: Front Lens Cover x 1pcNotes: 1. more product details1.【To Prevent Dirt】: Front Lens is a great tool to keep your camera lens clean. And it also can prevent water, dirt, and fine [...]
Melon Picking Fruit Picker Thumb Picking Knife Cooking Accessories Silicone Thumb Knife Protector Optional Cutter Pinching Plant Description: Cross-border package weight: 0.008kg Unit weight: 0.008kg Product volume: 26cm x 26cm x 18cm Origin: Guangdong Imported or not: No Model: small size+ index finger cover Article No.: MZD01 Name: thumb knife Material: silicone Processing customization: No Scope of application: agriculture and forestry Unit weight: 8g Specification: thumb straight knife large+1 Specifications: 1. It is widely used to protect fingers and is flexible. 2. Stainless steel cutter head is solid and durable. 3. It is made of high-quality manganese free stainless steel, [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.